Tiger Industrial is NOT a material Supplier
This information is for reference ONLY
For special material requirements
We recommend:
Bralco Metals
Phone: (714) 736-4800
Fax: (714) 736-4840
Gage thickness table
Set Back Chart - .030 Radius
Steel / SS__________Aluminum
| GA. |
THK. |
SB. |
THK. |
S.B. |
| 22 |
.030 |
.050 |
|
|
| 20 |
.036 |
.060 |
.030 |
.054 |
| 18 |
.047 |
.075 |
.040 |
.064 |
| 16 |
.059 |
.090 / .095 |
.050 |
.081 |
| 14 |
.074 |
.110 / .115 |
.063 |
.095 |
| 13 |
.089 |
.140 |
.070 |
.115 |
| 12 |
.105 |
.160 |
.080 |
.122 |
| 11 |
.119 |
.180 / .205 |
.090 |
.140 |
| 10 |
.135 |
.200 |
.125 |
.190 |
| Screw Clearances |
| Size |
Tight |
Normal |
Loose |
| #1 |
0.076 |
0.081 |
0.089 |
| #2 |
0.089 |
0.096 |
0.1065 |
| #4 |
0.116 |
0.1285 |
0.136 |
| #6 |
0.144 |
0.1495 |
0.1695 |
| #8 |
0.1695 |
0.177 |
0.1935 |
| #10 |
0.196 |
0.201 |
0.221 |
| 1/4" |
0.257 |
0.266 |
0.2812 |
| 3/8" |
0.386 |
0.397 |
0.4062 |
| 1/2" |
0.5156 |
0.5312 |
0.5469 |
Hem Set Back = .55 x Material Thickness
AMS (former Federal) Specifications
SAE SHORT SERIES PORT COUNTERBORES
MS16142, SAE J514 & SAE J1926/1
|
MS16142
SAE J514
SAE J1926/1
|
MS16142, SAE J514 & SAE J1926/1
| Tool No |
Thread
Size |
±.005
C |
±.001
D |
±.002
E |
±.005
F |
±.005
J |
±0°30'
K |
±.001
T |
Ref
U |
X |
+.0000
-.0005
Y |
Z |
| SAE-2SS MS16142 |
5/16-24 |
.047 |
.3605 |
.082 |
.682 |
.473 |
12° |
.270 |
.064 |
2 |
.5000 |
3-3/4 |
| SAE-3SS MS16142 |
3/8-24 |
.093 |
.4235 |
.082 |
.760 |
.473 |
12° |
.333 |
.069 |
2 |
.5000 |
3-3/4 |
| SAE-4SS MS16142 |
7/16-20 |
.125 |
.4895 |
.101 |
.838 |
.552 |
12° |
.386 |
.075 |
2 |
.5000 |
3-3/4 |
| SAE-5SS MS16142 |
1/2-20 |
.188 |
.5525 |
.101 |
.916 |
.552 |
12° |
.449 |
.075 |
2-1/32 |
.7500 |
4 |
| SAE-6SS MS16142 |
9/16-18 |
.250 |
.6185 |
.105 |
.979 |
.614 |
12° |
.506 |
.074 |
2-1/32 |
.7500 |
4 |
| SAE-8SS MS16142 |
3/4-16 |
.312 |
.8135 |
.108 |
1.198 |
.696 |
15° |
.686 |
.108 |
2-1/32 |
.7500 |
4 |
| SAE-10SS MS16142 |
7/8-14 |
.437 |
.9445 |
.108 |
1.354 |
.786 |
15° |
.801 |
.1051 |
2-9/32 |
1.0000 |
4-1/2 |
| SAE-12SS MS16142 |
1-1/16-12 |
.562 |
1.1505 |
.138 |
1.635 |
.911 |
15° |
.976 |
.120 |
2-9/32 |
1.0000 |
4-5/8 |
| SAE-14SS MS16142 |
1-3/16-12 |
.687 |
1.2755 |
.138 |
1.775 |
.911 |
15° |
1.102 |
.120 |
2-9/32 |
1.0000 |
4-5/8 |
| SAE-16SS MS16142 |
1-5/16-12 |
.812 |
1.4005 |
.138 |
1.920 |
.911 |
15° |
1.226 |
.120 |
2-9/32 |
1.0000 |
4-5/8 |
| SAE-20SS MS16142 |
1-5/8-12 |
1.000 |
1.7155 |
.140 |
2.280 |
.911 |
15° |
1.538 |
.155 |
2-9/32 |
1.0000 |
4-5/8 |
| SAE-24SS MS16142 |
1-7/8-12 |
1.250 |
1.9630 |
.140 |
2.570 |
.911 |
15° |
1.788 |
.155 |
2-9/32 |
1.0000 |
4-5/8 |
| SAE-32SS MS16142 |
2-1/2-12 |
1.750 |
2.5895 |
.140 |
3.490 |
.911 |
15° |
2.414 |
.192 |
2-9/32 |
1.0000 |
4-5/8 |
| AMS-QQ-A-200 |
general specification for extruded rod, bar, shapes, tube & wire |
| AMS-QQ-A-200/3 |
2024 extruded rod, bar, shapes, tube & wire |
| AMS-QQ-A-200/8 |
6061 extruded rod, bar, shapes, tube & wire |
| AMS-QQ-A-200/9 |
6063 extruded rod, bar, shapes, tube & wire |
| AMS-QQ-A-200/11 |
7075 extruded rod, bar, shapes, tube & wire |
| AMS-QQ-A-200/15 |
7075-T76, T76510, T76511, extruded rod, bar & shapes |
| AMS-QQ-A-200/16 |
6061-T6 extruded structural shapes |
| AMS-QQ-A-225 |
general spec for drawn, rolled, or cold finished wire, rod, bar & special shapes |
| AMS-QQ-A-225/1 |
1100 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/2 |
3003 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/3 |
2011 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/4 |
2014 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/5 |
2017 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/6 |
2024 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/7 |
5052 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-225/8 |
6061drawn, rolled or cold finished rod, bar, wire and special shapes |
| AMS-QQ-A-225/9 |
7075 drawn, rolled or cold finished rod, bar, wire and special shapes |
| AMS-QQ-A-225/10 |
6262 drawn, rolled or cold finished rod, bar & wire |
| AMS-QQ-A-250 |
general specification for sheet and plate |
| AMS-QQ-A-250/1 |
1100 sheet and plate |
| AMS-QQ-A-250/2 |
3003 sheet and plate |
| AMS-QQ-A-250/4 |
2024 sheet and plate |
| AMS-QQ-A-250/5 |
Alclad 2024 sheet and plate |
| AMS-QQ-A-250/6 |
5083 sheet and plate |
| AMS-QQ-A-250/7 |
5086 sheet and plate |
| AMS-QQ-A-250/8 |
5052 sheet and plate |
| AMS-QQ-A-250/9 |
5456 sheet and plate |
| AMS-QQ-A-250/10 |
5454 sheet and plate |
| AMS-QQ-A-250/11 |
6061 sheet and plate |
| AMS-QQ-A-250/12 |
7075 sheet and plate |
| AMS-QQ-A-250/13 |
Alclad 7075 sheet and plate |
| AMS-QQ-A-250/24 |
7075-T76 & T7651 sheet and plate |
| WW-T-700 |
general specifications for seamless drawn tube |
| WW-T-700/1 |
1100 seamless drawn tube |
| WW-T-700/2 |
3003 seamless drawn tube |
| WW-T-700/3 |
2024 seamless drawn tube |
| WW-T-700/4 |
5052 seamless drawn tube |
| WW-T-700/5 |
5086 seamless drawn tube |
| WW-T-700/6 |
6061 seamless drawn tube |
| WW-T-700/7 |
7075 seamless drawn tube |
Aircraft Aluminum Specifications Reference
| AMS-4021 |
Alclad 6061-0 sheet & plate |
| AMS-4022 |
Alclad 6061-T4 sheet & plate |
| AMS-4023 |
Alclad 6061-T6 sheet & plate |
| AMS-4025 |
6061-0 sheet & plate |
| AMS-4026 |
6061-T4 sheet & plate |
| AMS-4027 |
6061-T6 sheet & plate |
| AMS-4033 |
2024-T351 plate |
| AMS-4034 |
Alclad 2024-T351 plate |
| AMS-4035 |
2024-0 sheet & plate |
| AMS-4036 |
Alclad one side 2024-T3 sheet & T351 plate |
| AMS-4037 |
2024-T3 sheet & T351 plate |
| AMS-4038 |
7075-T651 plate |
| AMS-4039 |
Alclad 7075-T651 plate |
| AMS-4040 |
Alclad 2024-0 sheet & plate |
| AMS-4041 |
Alclad 2024-T3 sheet & plate |
| AMS-4045 |
7075-T6 sheet & T651 plate |
| AMS-4046 |
Alclad one side 7075-T6 sheet & T651 plate |
| AMS-4048 |
Alclad 7075-0 sheet & plate |
| AMS-4049 |
Alclad 7075-T6 sheet & T651 plate |
| AMS-4053 |
6061-T651 plate |
| AMS-4056 |
5083-0 sheet & plate |
| AMS-4062 |
1100-H14 drawn tube |
| AMS-4065 |
3003-0 drawn tube, seamless |
| AMS-4067 |
3003-H14 drawn tube, seamless |
| AMS-4070 |
5052-0 drawn tube, seamless |
| AMS-4078 |
7075-T7351 plate |
| AMS-4079 |
6061-0 drawn tube, special tolerances |
| AMS-4080 |
6061-0 drawn tube, special tolerances |
| AMS-4081 |
6061-T4 drawn, hydraulic tube |
| AMS-4082 |
6061-T6 drawn tube |
| AMS-4083 |
6061-T6 drawn, hydraulic tube |
| AMS-4088 |
2024-T3 drawn tube |
| AMS-4102 |
1100-F rolled or cold finished wire, rod & bar |
| AMS-4112 |
2024-T6 rolled, drawn or cold finished wire rod & bar |
| AMS-4113 |
6061-T6 structural shapes |
| AMS-4115 |
6061-0 rolled, drawn or cold finished wire, rod & bar |
| AMS-4116 |
6061-T4 rolled, drawn or cold finished wire, rod & bar |
| AMS-4117 |
6061-T6 rolled, drawn or cold finished wire, rod, & bar |
| AMS-4118 |
2017-T4 rolled, drawn or cold finished wire, rod & bar |
| AMS-4119 |
2024-T351 rolled or cold finished rod & bar |
| AMS-4120 |
2024-T4 rolled, drawn or cold finished wire, rod & bar |
| AMS-4121 |
2014-T6 rolled, drawn, or cold finished wire, rod & bar |
| AMS-4122 |
7076-T6 rolled or cold finished wire, rod & bar |
| AMS-4123 |
7075-T651 rolled or cold finished rod & bar |
| AMS-4124 |
7075-T7351 rolled or cold finished bar |
| AMS-4129 |
6061-T651 rod & bar, rolled or cold finished |
| AMS-4150 |
6061-T6 extruded wire, rod, bar, shapes & tube |
| AMS-4152 |
2024-T3 extruded wire, rod, bar, shapes & tube |
| AMS-4153 |
2014-T6 extruded wire, rod, bar, shapes & tube |
| AMS-4154 |
7075-T6 extruded wire, rod, bar, shapes & tube |
| AMS-4156 |
6063-T6 extruded wire, rod, bar & shapes |
| AMS-4165 |
2024-T3511 extruded wire, rod, bar & shapes |
| AMS-4166 |
7075-T73 extruded wire, rod, bar, shapes & tube |
| AMS-4167 |
7075-T73511 extruded wire, rod, bar & shapes |
| AMS-4168 |
7075-T6510 extruded wire, rod, bar, shapes & round tube |
| AMS-4169 |
7075-T6511 extruded wire, rod, bar, shapes &round tube |
| AMS-4173 |
6061-T6511 extruded rod, bar, shapes & tube |
Aluminum Tubing Specification Reference
| Alloy
2024
2024
2024
3003
5052
5052
6061
6061
6061
7075
7075
|
Type
Drawn Seamless
Hydraulic
Extruded
Drawn Seamless
Drawn Seamless
Hydraulic
Drawn Seamless
Hydraulic
Extruded
Drawn Seamless
Extruded
|
(Former) Federal
AMS WW-T-700/3
AMS WWT 700/3
AMS QQA-200/3
AMS WW-T-700/2
AMS WW-T-700/4
AMS
AMS WW-T-700/6
AMS MIL-T-7081
AMS QQA-200/8
AMS WW-T-700/7
AMS QQA-200/11 |
Stainless Steel Tube Specifications Reference
.125" - Pipe sizes
| Grade |
Specification |
| 304 |
AMS 5560, 5565, 5566, 5567 |
| 304 |
AMS 5639, 5695, ASTM A249, A269 |
| 304 |
MIL-T-6845, 8504, 8506 |
| 321 |
AMS 5557, 5570, 5576, 5645 |
| 321 |
MIL-T-8606, 8808, 8973 |
| 347 |
AMS 5556, 5571, 5574, 5616 |
| 347 |
MIL-T-8606, 8808 |
| 316 |
AMS 5573 |
| 410 |
AMS 5591, 5613 |
| 21-6-9 |
AMS 5561, 5562 |
Alloy Steel Tube Specifications
Grade |
Specification |
| 4130 |
MIL-T-6736, AMS 6360/6371, ASTM A519 |
| 4340 |
AMS 6415 |
Tiger Industrial is NOT a material Supplier
This information is for reference ONLY
|
